DiscImageChef Report for SyQuest SparQ SA_0043

ATA characteristics:
ATA device
Model: SyQuest SparQ
Firmware revision: SA_0043
Supported ATA versions: ATA/ATAPI-4
Maximum ATA revision supported: ATA/ATAPI-4 T13 1153D revision 17
Parallel ATA device:
Advanced PIO: PIO0 PIO1

Device is removable
Device capabilities:
Standby time values are standard
IORDY is supported and can be disabled
A maximum of 8 sectors can be transferred per interrupt on READ/WRITE MULTIPLE
Device supports setting a maximum of 16 sectors
At minimum 120 ns. transfer cycle time per word in PIO, without flow control
At minimum 120 ns. transfer cycle time per word in PIO, with IORDY flow control
Command set and features:
NOP is supported and enabled
Look-ahead read is supported and enabled
Write cache is supported and enabled
Power management is supported and enabled
Removable media feature set is supported and enabled
28-bit LBA is supported
Removable Media Status Notification is supported and enabled
Removable Media Status Notification feature set is supported

Tested media:
Information for medium named "SparQ"
Drive recognizes this medium.
Medium model: SparQ
Logical sector size: 512 bytes
READ LONG sector size: 550 bytes
Medium has 1961069 blocks of 512 bytes each
Medium size: 1004067328 bytes, 1004 Mb, 957.55 MiB
Cylinders: 1945 max., 1945 current
Heads: 16 max., 16 current
Sectors per track: 63 max., 63 current
Sectors addressable in CHS mode: 1960560 max., 1960560 current
Medium size in CHS mode: 1003806720 bytes, 1003 Mb, 957.30 MiB
Sectors addressable in sectors in 28-bit LBA mode: 1961069
Medium size in 28-bit LBA mode: 1004067328 bytes, 1004 Mb, 957.55 MiB
Device can use the READ SECTOR(S) RETRY command in CHS mode with this medium
Device can use the READ SECTOR(S) command in 28-bit LBA mode with this medium
Device can use the READ SECTOR(S) RETRY command in 28-bit LBA mode with this medium
Device can use the SEEK command in CHS mode with this medium
Device can use the SEEK command in 28-bit LBA mode with this medium