DiscImageChef Report for iomega jaz 1GB H.72

SCSI characteristics:
Vendor: iomega
Product: jaz 1GB
Revision: H.72
Device is connected and supported.
Direct-access device
Device claims to comply with ANSI X3.131:1994 (SCSI-2)
Device does not claim to comply with any SCSI ECMA standard
Device does not claim to comply with any SCSI ISO/IEC standard
Device is removable
Device supports synchronous data transfer
Device supports linked commands
Device supports TCQ queue
Device does not support assymetrical access
Device supports only ST clocking
Device supports MODE SENSE (6)
Drive supports DPO and FUA bits

SCSI mode sense pages:
Mode Contents
MODE page 01h SCSI Read-write error recovery page:
Parameters can be saved
Automatic write reallocation is enabled
Automatic read reallocation is enabled
Drive will repeat read operations 100 times
Drive will repeat write operations 100 times
MODE page 02h SCSI Disconnect-Reconnect mode page:
Parameters can be saved
32 ratio of buffer that shall be full prior to attempting a reselection
32 ratio of buffer that shall be empty prior to attempting a reselection
Data transfer disconnect control is not used
MODE page 08h SCSI Caching mode page:
Parameters can be saved
Write-cache is enabled
Drive does not distinguish between cached read data
Drive does not distinguish between cached write data
Pre-fetch will be done for READ commands of 65535 blocks or less
A maximum of 65535 blocks will be pre-fetched
A maximum of 65535 blocks will be pre-fetched even if it is commanded to pre-fetch more
MODE page 2Fh Unknown mode page

Tested media:
Information for medium named "jaz"
Medium type code: 00h
Drive recognizes this medium.
Medium manufactured by: IOMEGA
Medium model: jaz
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 550 bytes
Medium has 2091050 blocks of 512 bytes each
Medium size: 1070617600 bytes, 1 Gb, 1.00 GiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium