DiscImageChef Report for FUJITSU MCF3064SS 0030

SCSI characteristics:
Vendor: FUJITSU (Fujitsu)
Product: MCF3064SS
Revision: 0030
Device is connected and supported.
Optical memory device
Device claims to comply with ANSI X3.131:1994 (SCSI-2)
Device does not claim to comply with any SCSI ECMA standard
Device does not claim to comply with any SCSI ISO/IEC standard
Device is removable
Device supports relative addressing
Device supports synchronous data transfer
Device supports linked commands
Device does not support assymetrical access
Device supports only ST clocking
Device complies with unknown standard code 0x3030
Device complies with unknown standard code 0x3131
Device supports MODE SENSE (6)
Drive supports DPO and FUA bits

SCSI mode sense pages:
Mode Contents
MODE page 01h SCSI Read-write error recovery page:
Parameters can be saved
Automatic write reallocation is enabled
Drive will repeat read operations 31 times
Drive will repeat write operations 1 times
MODE page 02h SCSI Disconnect-Reconnect mode page:
Parameters can be saved
128 ratio of buffer that shall be full prior to attempting a reselection
Data transfer disconnect control is not used
MODE page 08h SCSI Caching mode page:
Parameters can be saved
Drive does not distinguish between cached read data
Drive does not distinguish between cached write data
No pre-fetch will be done
Drive should not reorder the sequence of write commands to be faster
Drive should have 6 cache segments
MODE page 0Ah SCSI Control mode page:
Parameters can be saved
The logical unit maintains one task set for all nexuses
Commands should be sent strictly ordered
If ACA is established, the task set commands shall resume after it is cleared, otherwise they shall terminate with CHECK CONDITION
LUN shall clear unit attention condition reported in the same nexus
On medium insertion, it shall be loaded for full access
MODE page 20h Unknown mode page
MODE page 00h Unknown vendor mode page

Tested media:
Information for medium named "ECMA-201"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: BASF
Medium model: MO230
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 600 bytes
Medium has 446325 blocks of 512 bytes each
Medium size: 228518400 bytes, 228 Mb, 217.93 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium