DiscImageChef Report for FUJITSU M2512A 1314

SCSI characteristics:
Vendor: FUJITSU (Fujitsu)
Product: M2512A
Revision: 1314
Device is connected and supported.
Optical memory device
Device claims to comply with ANSI X3.131:1994 (SCSI-2)
Device does not claim to comply with any SCSI ECMA standard
Device does not claim to comply with any SCSI ISO/IEC standard
Device is removable
Device supports relative addressing
Device supports synchronous data transfer
Device supports linked commands
Device does not support assymetrical access
Device supports only ST clocking
Device supports MODE SENSE (6)

SCSI mode sense pages:
Mode Contents
MODE page 01h SCSI Read-write error recovery page:
Automatic write reallocation is enabled
Drive will repeat read operations 16 times
Drive will repeat write operations 1 times
MODE page 02h SCSI Disconnect-Reconnect mode page:
128 ratio of buffer that shall be full prior to attempting a reselection
Data transfer disconnect control is not used
MODE page 08h SCSI Caching mode page:
Write-cache is enabled
Drive does not distinguish between cached read data
Drive does not distinguish between cached write data
No pre-fetch will be done
MODE page 20h Unknown mode page
MODE page 00h Unknown vendor mode page

Tested media:
Information for medium named "ECMA-201"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: BASF
Medium model: MO230
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 600 bytes
Medium has 446325 blocks of 512 bytes each
Medium size: 228518400 bytes, 228 Mb, 217.93 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ LONG (10) command with this medium